THE FARROW PROCESS
The Farrow System® cleaning method uses low pressurized air combined with an environmentally friendly Farrow Green Clean™ media and heated water to remove a wide variety of surface coatings. Some of the primary features and benefits are:
- Operating air pressures cover a wide range and are easily adjustable from as low as 28 psi up to 84 psi.
- The water supply is heated and then emitted from the cleaning nozzle as a cooled vapor at an efficiently low rate of approximately 1/4 gallon per minute.
- The organic Farrow Green Clean™ media combines with the water and is distributed at a rate of about 2 pounds per minute.
- The amount of water dispersed is absorbed by the Green Clean™ media, leaving a moist residue, which is easily swept away and disposed of easily.
SAFE & GREEN
The Farrow System® is environmentally friendly and doesn’t use any chemicals or chemical by-products. Our Farrow Green Clean™ cleaning media is non-toxic which means that after use, it can be disposed of easily and properly. Dust levels are suppressed within the vaporized elements of Farrow Green Clean™ , therefore allowing this extremely low-pressure cleaning method to be used safely outdoors, within populated urban areas and even in enclosed environments.
"Because of the accuracy, speed and cleanliness of the system, there is little or no disturbance to adjacent buildings, equipment or to the general public. Project start to finish times are cut in half and the Farrow System® combined with Farrow Green Clean™ uses 50% less media than conventional sand blasters."
AMAZING RESULTS!
The Farrow System® is a unique low pressure cleaning method using only environmentally friendly media and by introducing heat in to the process, achieves maximum performance at minimum pressure, cleaning any surface without damaging it.
